ME 180

3-way-coaxial-floorstanding-loudspeaker in vented and closed box

The ME 180 extends Musikelectronic Geithain’s product range of passive high-end loudspeakers. The three-way concept comprises two highly efficient 10-inch woofer systems and a tweeter array of three vertically arranged 1-inch dome tweeters. Through this combination a sensitivity of 90 dB is achieved without wave guides.

(shown veneer: rosewood nature)

ME 180

The ME 180 extends Musikelectronic Geithain’s product range of passive high-end loudspeakers. The three-way concept comprises two highly efficient 10-inch woofer systems and a tweeter array of three vertically arranged 1-inch dome tweeters. Through this combination a sensitivity of 90 dB is achieved without wave guides. In connection with the linearised impedance the ME 180 is also the perfect partner to tube amplifiers. Power compression and non-linear distortions are therefore very low, even in fortissimo passages. The directivity index of the system has been optimised to listening distances between 3 and 6 metres, providing a natural sound image in stereo and multi-channel operation. The bass reflex system, designed to deliver optimal transient fidelity, ensures a precise and dry bass reproduction down to a roll-off frequency of 35 Hz. It is possible to close the cabinet’s vent and thereby prevent excessive increase in the bass range when positioned near walls.

Frequently used wave guides in front of tweeter systems make directivity control easy; however they tend to produce unavoidable colourations caused by short-time reflections at the inner horn surface. Musikelectronic Geithain breaks the mould by using a tweeter array, doing without horn attachments for sound level boost. The tweeter unit that is arranged coaxially in front of the midrange system guarantees the trademark low-colouration rendition of music and speech and creates the sound event closeness desired by the listener.

The ME 180 is adjustable to the acoustic conditions in the listening room. Especially in modern living rooms with longer reverberation time in the mid range the increase of the acoustic power in the presence range is possible as well as an attenuation at 200 Hz.

Summing up all the constructive measures, the ME 180 achieves seamless sound compatibility with all other products made in the Geithain manufacture. The highly neutral tone quality, excellent spatial performance and depth arrangement, together with fatigue-free monitoring of even most complex sound events are typical ME Geithain characteristics of this loudspeaker.

This loudspeaker will harmonise perfectly with your listening room due to its attractive design and the large variety of different wood veneers or high-gloss or semi-gloss varnish surfaces.

General

passive high-end-coaxial-loudspeaker for listening distances between 3 m and 6 m

Principle of construction

coaxial 3-way-system in vented and closed box

Maximum SPL

118 dB peak / r = 1 m (3.3 ft)

Sensitivity

90 dB / r = 1 m (3.3 ft)

Bandwidth

35 Hz ... 20 kHz ± 3 dB / 2 pi

Adjustments

200 Hz - 3 dB via gold plated jumper
3 kHz + 2 dB via gold plated jumper

Directivity index
from 100 Hz ... 10 kHz


increasing from 2 dB to 13 dB

Total harmonic distortion
measured at 96 dB / r = 1 m (3.3 ft)
from 100 Hz ... 10 kHz



≤ - 44 dB

Electronic crossover frequencies

300 Hz and 2 kHz

Impedance

4 Ohms (impedance linearised)

Nominal power capacity

200 W

Maximum power capacity

500 W peak

Recommended amplifier power

50 W ... 500 W peak

Loudspeaker systems

Woofer
260 mm (10’’) cone
Mid-woofer
260 mm (10’’) cone
Tweeter
3x 25 mm (1’’) dome

Input connector

bi-wiring terminal
4 mm gold-plated binding posts / banana jacks

Dimensions (H x W x D)

1.165 x 357 x 419 mm (45.9’’ x 14.1’’ x 16.5’’)

Weight

53 kg (116.8 lbs)

Design of the cabinet

MDF-wood in ash black veneered;
optional different veneers or colours

Brochure and Documentation

Standard veneer ash black (RAL9005), optional veneers and optional colours

We offer our loudspeakers in standard veneer ash black (RAL9005) or for an additional charge in different optional veneers respectively optional colours. This website provides an overview on the optional veneer and lacquer styles. We are pleased to check if your desired individual veneer and colour can be realised.

Important information about deviations from sample pattern

Wood is a natural product. Even the most thorough manufacturing can result in deviations in colour or structure and is no cause for complaint.
Images are represented differently on every screen and hence not colour-proof.